AIM104-RELAY8/IN8 - Arcom AIM104-RELAY8/IN8 PC/104 Module. 8 Changeover Relays | 8 Opto-isolated...
- Part Number:
- AIM104-RELAY8/IN8
- Model Number:
- AIM104
- Make:
- ARCOM
- Lead Time:
- Available
- Qty In Stock:
- Available
Arcom AIM104-RELAY8/IN8 PC/104 Module. 8 Changeover Relays | 8 Opto-isolated Inputs Simple Type: I/O Module
The AIM104-RELAY8/IN8 is an 8-bit PC/104 module providing 8 changeover relays, and 8 optoisolated inputs. The module provides upto 1500V electrical isolation between your PC/104 based control system and the electrical system you are controlling. The isolation between adjacent channels is limited by the wiring and connectors to 100V. The power switching rating for the relay contacts is 60W (resistive load). The relays and board layout are designed to switch voltages up to 220v DC (125v AC) and currents up to 1.0A. However the Low Voltage Directive specifies that the product may only be safely used up to 48v DC. The board includes jumper options for each digital input to select a 10ms input debounce filter.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 8 changeover relays with a power switching rating of 60W (resistive load)
- 8 Opto-isolated inputs
- All inputs include reverse protection diodes
- Board access LED
- Both normally closed and normally open relay terminals are available at the I/O connector
- MTBF: 91,195 hours (using generic figures from MIL-HDBK-217F at benign ground)
- Operating temperature range, -20°C - +70°C
- Opto-input switching voltage : 10v to 30v
- Output status readback register
- Power consumption +5V +/- 0.25V 250mA typical
- Relay drivers disabled on power up and reset
- Switching voltage upto 48v DC and switching currents up to 1.0A
Specifications
- Base Address Range: 0 to 3FC hex
- Bus Interface: IEEE996 bus interface 8-bit PC/104
- Debounce Time: 10ms
- Electrical Isolation: 1500V
- I/O: I/O space required: 4 bytes I/O Connector: 50-way Ribbon
- Inputs: Input channels: 8 Opto-Input voltage range: 10 to 30V Maximum input voltage: 30V Max. input frequency: 10KHz (filter disabled) Max. input frequency: 50Hz (filter enabled)
- Inter-channel Isolation: 100V
- Maximum Switching Voltage & Current: Max. switching voltage: 30V DC Max. switching current: 1.0A
- MTBF: MTBF: 90,000hrs
- Relay Power Switching: 60W (resistive load)
- Temperature: Operating temperature: -20 to +70°C Storage temperature: -40 to +125°C
Applications
- None Available
Aliases
- None Available
Related Items
AIM104-IN16
Arcom AIM104-IN16 Series PC/104 Input Interface Boards | 16 Channels
AIM104-IO32
Arcom AIM104-IO32 Series PC/104 32 TTL Digital I/O Interface Boards
AIM104-OUT16
Arcom AIM104-OUT16 Driver Board - 16 Opto-isolated Darlington driver outputs
AIM104-PULSE
Arcom AIM104-PULSE Series PC/104 Pulse Interface Boards